Replacement dub wheel spinner bearing. Fits DUB style spinner wheels with 4 bolt bearing insert. Will not work on Davin SS1, SS2, or SS3 spinners.
small (72.6mm outer OD, 45.4mm inner OD)
Part number S100140 was previous number (small bearing) number on bushing is # 6805rs.
As example a quarter will just fit through the whole in the bearing. Sleeve to use is a DUBS70014A
All our replacements are direct from the factory.
We`ve had people repress their own bushings into
the bearing housing. It`s not recommended, as the factory puts them in with a hydraulic press and if not put back in correctly they will vibrate or even fail. Failure can result in the spinner coming off. Where this is cheap it doesn`t last like
the factory replacement housing from Dub. Typically a spinner bearing will last around 15K miles depending on road conditions. People that have repressed only get maybe a few thousand before issues arrise.
We`ve had people try to get off cheap and then come back and buy replacement spinners when they lose one, because the repressed bearing fails.
If not shown in stock this part may ship direct from DUB to you.
Other fitment as listed by some of our techs listed below
72.6MM OUTER OVERALL DIAMETER (2 7/8 INCHES) 25.4MM INNER DIAMETER 45.4MM INNER OD PART # S100140 WAS PREVIOUS NUMBER (SMALL BEARING) NUMBER ON BUSHING IS # 6805RS 18 TO 30 INCH BELLAGIO ESINEM 20 TO 26 INCH NASTY SPINE TRUMP VOODOO JOKER SHAOLIN SPINNER WHEEL 22 INCH DA BOMB SPINNER ASSEMBLY 20 INCH DUB CREAM DUB DELUSION DAVIN SPINNER BEARING AND HOUSING
May fit other vehicles than what we have listed online at this time, please call us at 817-473-3500 for assistance or check with DUB for additional applications.